Saltar al contenido principal

Cambios a Paso #2

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Lift the LVDSdisplay data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[* red] Lift the LVDSdisplay data cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[* black] Lift the DC-In board slightly and pull its connector straight away from the socket on the logic board.