Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #2

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* red] Lift the LVDS cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[*
black] Insert wisdom hereLift the DC-In board slightly and pull its connector straight away from the socket on the logic board.
[* red] Lift the LVDS cable slightly for enough clearance to remove the two Phillips screws securing the DC-In board to the upper case.
[*
black] Insert wisdom hereLift the DC-In board slightly and pull its connector straight away from the socket on the logic board.

Imagen 1

Versión Antigua

Nueva Versión