Saltar al contenido principal

Cambios a este Paso

Editado por Jake Devincenzi

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Set the new hard drive into the open area where the plastic positioner was.
[* icon_note
red] Make sure that the connectors on the hard drive connectors are facing down, as shown, otherwise you will not be able to installdown before placing it into the driveenclosure.
[* black] Gently place the hard drive into the enclosure's hard drive slot
.
[* black] While firmly holding the enclosure in place with one hand, use your other hard to press the hard drive overinto the enclosure connectors.
[* black] Once the hard drive is snug, reinsert the plastic positioner, while holding the hard drive against the bottom of the enclosure.
[* black] Set the new hard drive into the open area where the plastic positioner was.
[* icon_note
red] Make sure that the connectors on the hard drive connectors are facing down, as shown, otherwise you will not be able to installdown before placing it into the driveenclosure.
[* black] Gently place the hard drive into the enclosure's hard drive slot
.
[* black] While firmly holding the enclosure in place with one hand, use your other hard to press the hard drive overinto the enclosure connectors.
[* black] Once the hard drive is snug, reinsert the plastic positioner, while holding the hard drive against the bottom of the enclosure.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Versión Antigua

Nueva Versión