Saltar al contenido principal

Cambios a Paso #9

Editado por Vicne Vicne

Edicion rechazada por David Hodson

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] We lifted up the cover of the optical drive by removing the sixfive Phillips #00 screws. These are all labeled on the previous imageimage (there is no screw in the top right highlight).
[* red] We lifted up the cover of the optical drive by removing the sixfive Phillips #00 screws. These are all labeled on the previous imageimage (there is no screw in the top right highlight).
[* icon_caution] Because of a secured wire leading to the drive, we reattached the cover to facilitate the remove of the entire drive assembly without harming any of the electronics.
[* black] There are a ton of parts in the optical drive, but there is nothing very fancy about this drive compared to other slot-loading drives, so I didn't take it apart completely. There are also a ton of gears and levers that I did not want to deal with.