Saltar al contenido principal

Cambios a Paso #9

Editado por Sterling Hirsh

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* blackred] We lifted up the cover of the optical drive by removing the six PHPhillips #00 screws. These are all labeled on the previous image.
[* blackicon_caution] Because of a secured wire leading to the drive, we reattached the cover to facilitate the remove of the entire drive assemblyassembly without harming any of the electronics.
[* black] There are a ton of parts in the optical drive, but there is nothing very fancy about this drive compared to other slot-loading drives, so I didn't take it apart completely. There are also a ton of gears and levers that I did not want to deal with
.
[* blackred] We lifted up the cover of the optical drive by removing the six PHPhillips #00 screws. These are all labeled on the previous image.
[* blackicon_caution] Because of a secured wire leading to the drive, we reattached the cover to facilitate the remove of the entire drive assemblyassembly without harming any of the electronics.
[* black] There are a ton of parts in the optical drive, but there is nothing very fancy about this drive compared to other slot-loading drives, so I didn't take it apart completely. There are also a ton of gears and levers that I did not want to deal with
.