Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #2

Editado por Mario T

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* red] Use the small flat-head screwdriver to scrape the glue spots off the retaining posts on all four corners of the speaker to be removed. (Right speaker shown)
[* icon_caution] Be careful when scraping the glue spots off to avoid damaging the logic board.
[*
black] fdsaWhen reassembling, mix a small amount of 5 minute epoxy and apply it to the four retaining posts. Wait the full 5 minutes for the epoxy to harden before continuing with your reassembly.
[* red] Use the small flat-head screwdriver to scrape the glue spots off the retaining posts on all four corners of the speaker to be removed. (Right speaker shown)
[* icon_caution] Be careful when scraping the glue spots off to avoid damaging the logic board.
[*
black] fdsaWhen reassembling, mix a small amount of 5 minute epoxy and apply it to the four retaining posts. Wait the full 5 minutes for the epoxy to harden before continuing with your reassembly.

Imagen 1

Ninguna imagen anterior

Añadido