Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the following screws securing the camera data cable and right speaker to the upper case:
[* red] Two 8One 9.9 mm partially threaded Phillips screws.screw
[* orange] One 4mm9.6 mm threaded Phillips screw (the bottom-most
[* yellow] One 4 mm Phillips
screw in the photo to the left).
[* red] Two 8One 9.9 mm partially threaded Phillips screws.screw
[* orange] One 4mm9.6 mm threaded Phillips screw (the bottom-most
[* yellow] One 4 mm Phillips
screw in the photo to the left).
[* black] Slide the camera cable bracket out from under the subwoofer and remove it from the computer.
[* black] Note:[* icon_note] The iSight cable has an eyelet through which passes the left-most screw in these pictures.
[* black] Note:[* icon_note] The iSight cable has an eyelet through which passes the left-most screw in these pictures.

Imagen 1

Versión Antigua

Nueva Versión