Saltar al contenido principal

Cambios al paso #11

Editado por Brett Hartt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[title] Checking the Oil
[* black] Locate the dipstick on the right side of the engine.
[* black] Remove the dipstick from its housing and wipe it off with a rag.
[* black] Re-insert the dipstick, and then remove it. This will give an accurate reading for the level of oil in the engine.
[*[* icon_note] The oil level should be between the two dots marked on the dipstick. If the oil level is too low,below the bottom dot, or there mayis not be any oil at all on the dipstickdipstick at all, you will need to add oil.
[*[* icon_note] The oil level should be between the two dots marked on the dipstick. If the oil level is too low,below the bottom dot, or there mayis not be any oil at all on the dipstickdipstick at all, you will need to add oil.