Cambios al paso #3
Editado por Brett Hartt —
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* icon_caution] When working with batteries, you must always remove the negative lead from the battery first, even if the corrosion is only on the positive lead. | |
| - | [* black] It is also a very good idea to work with one hand behind your back, just to make sure that you don't accidentally short the circuit on the battery. |
| [* black] Using a ***box wrench*** loosen the nut on the screw holding the ***negative*** terminal in place. | |
| [* black] If the corrosion is preventing you from accessing the nut, use a the other end of the wrench or another scraping tool to scrape some of the corrosion away. | |
| [* black] Pull the negative battery cable off of the negative lead. |