Saltar al contenido principal

Cambios al paso #1

Editado por Corey Brown

Edicion aprobada por Corey Brown

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Insert the loop of the short cord through eyelet from the rear of the pedal Pass cord down and under rear black pulley, and attach spring to loop.
+ [* icon_note] The eyelet is located under the top plate, toward front of the pedal.
+ [* black] Place the cord inside the pedal, under the main cross shaft, and let it lie there for now.
+[* black] Move the pedal to the “toe-up” position.
+[* black] Insert the loop of the long cord through the rear side of eyelet toward the front of the pedal.

Imagen 1

Ninguna imagen anterior

Añadido