Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Jake Devincenzi

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Slide the pointed end of the spudger into the slot under the upper right corner of the ear speaker and gently pry gently upwards.
[* icon_caution] Be careful during this step, as the upper portion of the speaker can easily detach from the lower portion, causing the coil inside to unwind. This does not matter too much if you are installing a new speaker, but it doesn't hurt to keep the old one intact, so beBe sure to pry the entire assembly up.
[* black] Slide the pointed end of the spudger into the slot under the upper right corner of the ear speaker and gently pry gently upwards.
[* icon_caution] Be careful during this step, as the upper portion of the speaker can easily detach from the lower portion, causing the coil inside to unwind. This does not matter too much if you are installing a new speaker, but it doesn't hurt to keep the old one intact, so beBe sure to pry the entire assembly up.
[* black] Lift the ear speaker up and out of the device.