Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Daniel

Edicion rechazada por David Hodson

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the flat end of a spudger to pry up the right side of the ear speaker cover assembly.
[* icon_caution] Do not try to pry the assembly all the way off, as it is still connected at two points.
[* red] Turn the spudger around and use the pointed side to detach the twothree clips securing the top of the assembly. It is difficult so be very careful and cautious. It is easier if you have access the other side without a glass screen on.
[* red] Turn the spudger around and use the pointed side to detach the twothree clips securing the top of the assembly. It is difficult so be very careful and cautious. It is easier if you have access the other side without a glass screen on.
[* black] Once the clips are detached, lift the cover assembly up from the device.

Imagen 2

Versión Antigua

Nueva Versión