Saltar al contenido principal

Cambios a Paso #3

Editado por Walter Galan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Using a spudger, pry up on the AirportAirPort card from the end nearest the hard drive to separate the connector from the logic board.
[* icon_note] Be sure to pry only between the metal frame and the AirportAirPort card.
[* black] Using a spudger, pry up on the AirportAirPort card from the end nearest the hard drive to separate the connector from the logic board.
[* icon_note] Be sure to pry only between the metal frame and the AirportAirPort card.

Imagen 1

Versión Antigua

Nueva Versión