Saltar al contenido principal

Cambios al paso #1

Editado por Matt Staubus

Edicion aprobada por Matt Staubus

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the 2-mm Phillips head J000 screw located at the top of the S9700 just below the satellite picture and Wi-Fi marking.
-[* yellow] Remove the two 4-mm Phillips head J000 screws right below the zoom dial.
-[* green] Remove the 4-mm Phillips head J000 screw just above the battery compartment.
+[* red] Remove the 2-mm J000 screw located at the top of the S9700 just below the satellite picture and Wi-Fi marking.
+[* yellow] Remove the two 4-mm J000 screws right below the zoom dial.
+[* green] Remove the 4-mm J000 screw just above the battery compartment.