Saltar al contenido principal

Cambios al paso #1

Editado por Jessica Voss

Edicion aprobada por Jessica Voss

Antes
Después
Sin cambios

Líneas de Paso

+[* red] Using the plastic prying tool, lift the small latches holding the rear camera and ribbon cable to the motherboard
+[* black] Using the tweezers gently pull the ribbon cable from under the clamp
+[* icon_note] The removing of these parts are done the same way as the front facing camera

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido

Imagen 3

Ninguna imagen anterior

Añadido