Saltar al contenido principal

Cambios a Paso #3

Editado por Miroslav Djuric

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Using a spudger, pry up on the AirPort card from the end nearest to the hard drive to separate the connector from the logic board.
[* black] Using a spudger, pry up on the AirPort card from the end nearest to the hard drive to separate the connector from the logic board.
[* icon_note] Be sure to pry only between the metal framework and the AirPort card.