Cambios al paso #2
Editado por Catherine Lintner —
Edicion aprobada por Catherine Lintner
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Locate the sync component hardware. It is a small circuit board that sits sideways with respect to the other circuit boards around it. | |
| - | [* black] Remove the two 5mm black screws (circled in red) holding the circuit board in place. The component should now slide out vertically. |
| + | [* black] Remove the two 5mm black screws (circled in red) holding the circuit board in place using a size J1 philips head screwdriver. The component should now slide out vertically. |