Cambios al paso #2
Editado por Hollynn Ricker —
Edicion aprobada por Hollynn Ricker
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Locate the sync component hardware. It is a small circuit board that sits sideways with respect to the other circuit boards around it. |
|---|---|
| + | [* black] Remove the two 5mm black screws holding the circuit board in place. The component should now slide out vertically. |
| + | [* black] Follow the wires connected to the sync component back to the main circuit board. Unplug the component from the main circuit board. |
| + | [* black] Plug in your replacement sync component hardware. |