Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

[* black] UseAngle an iOpener, heat gun, or hair dryer to heatopening pick and firmly press so that it slips under the back sidecover.
[* icon_note] Depending on the age
of the phone in orderphone, this can be difficult. Additional heating with the iOpener may help. You can pry carefully with a metal spudger to softencreate a gap for the adhesive securing the back panel.
[* black] Slide an
opening pick or other slim pry tool around the perimeter of the back cover to separate itpick.
[* black] UseAngle an iOpener, heat gun, or hair dryer to heatopening pick and firmly press so that it slips under the back sidecover.
[* icon_note] Depending on the age
of the phone in orderphone, this can be difficult. Additional heating with the iOpener may help. You can pry carefully with a metal spudger to softencreate a gap for the adhesive securing the back panel.
[* black] Slide an
opening pick or other slim pry tool around the perimeter of the back cover to separate itpick.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Ninguna imagen anterior

Añadido

Imagen 3

Ninguna imagen anterior

Añadido