Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #5

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

[* black] Reheat the iOpener and apply itApply firm, constant prying pressure to the picks to release the battery to help softenfrom the adhesive holding it to the display assemblyframe.
[* black] Use an old credit card, opening pick, or other flat plastic pry toolAs the battery loosens from the frame, move the picks inward and continue to carefully pry outupwards.
[* icon_note] The battery is secured to the frame with strong double-sided tape. To help release the battery, apply some high concentration (90% or higher) isopropyl alcohol under
the battery fromto help loosen the adhesive holding it in placeadhesive.
[* black] Reheat the iOpener and apply itApply firm, constant prying pressure to the picks to release the battery to help softenfrom the adhesive holding it to the display assemblyframe.
[* black] Use an old credit card, opening pick, or other flat plastic pry toolAs the battery loosens from the frame, move the picks inward and continue to carefully pry outupwards.
[* icon_note] The battery is secured to the frame with strong double-sided tape. To help release the battery, apply some high concentration (90% or higher) isopropyl alcohol under
the battery fromto help loosen the adhesive holding it in placeadhesive.
[* icon_caution] Don't deform or puncture the battery, or it may leak dangerous chemicals or catch fire.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Ninguna imagen anterior

Añadido