Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios a este Paso

Editado por Natalie W

Edicion aprobada por Natalie W

Antes
Después
Sin cambios

Líneas de Paso

[* black] After removing the back side, you should see 2 black rubber pads on the right side. Underneath it is two cables. Using a blue plastic opening tool, you'll want to unclip both of them .
[* black] You'll notice there are 17 screws around
the phone. Use the T3 bit screw driver to remove all oftwo black rubber pads on the screws.
[* black] Now the front screen and motherboard will pop off from that back panel
right side.
[* black] After removing the back side, you should see 2 black rubber pads on the right side. Underneath it is two cables. Using a blue plastic opening tool, you'll want to unclip both of them .
[* black] You'll notice there are 17 screws around
the phone. Use the T3 bit screw driver to remove all oftwo black rubber pads on the screws.
[* black] Now the front screen and motherboard will pop off from that back panel
right side.