Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios a este Paso

Editado por Chisi Amanda Xiong

Edicion aprobada por Chisi Amanda Xiong

Antes
Después
Sin cambios

Líneas de Paso

[* black] Look at the top of your phone. You should see the SIM card. Now pop out the SIM card on the top of phone with a SIM card injector tool.
[* black] Now hold your phone in your hand and use your dominant hand to carefully pry off the back of your phone, using the Flat end of the Spudger tool.
[* black] After removing the back side, you should see 2 black rubber pads on the right side. Underneath it is two cables. Using a blue plastic opening tool, you'll want to unclip both of them .
[* black] You'll notice there are 17 screws around the phone. Use the T4 bit screw driver to remove all of the screws.