Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #11

Editado por Nina Steinhaeuser

Edicion aprobada por Nina Steinhaeuser

Eliminado
Añadido
Sin cambios

Líneas de Paso

[title] Display Assembly Installation (Cont'd)
[* icon_reminder] Whether installing a replacement display assembly or re-using the existing display assembly, note the following:
[* black] Carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the outer case. [https://d3nevzfk7ii3be.cloudfront.net/igi/pOnFkdECiyCBgkjU|This photo|new_window=true] shows the display assembly being installed '''incorrectly''', with a fold in the digitizer cable.
[* icon_note] The photo on the rightleft shows the digitizer cable being correctly fed through to its full length.
[* icon_note] The photo on the rightleft shows the digitizer cable being correctly fed through to its full length.
[* icon_caution] If the digitizer cable has been installed incorrectly, it will not reach its socket on the logic board. '''Do not''' attempt to pull it through by force, or it will tear. Remove the display assembly, straighten the cable, and feed it through correctly.