Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #11

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Eliminado
Añadido
Sin cambios

Líneas de Paso

[title] Display Assembly Installation (Cont'd)
[* icon_reminder] Whether installing a replacement display assembly or re-using the existing display assembly, note the following:
[* black] Carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the outer case. The first photo[https://d3nevzfk7ii3be.cloudfront.net/igi/pOnFkdECiyCBgkjU|This photo] shows the display assembly being installed '''incorrectly''', with a fold in the digitizer cable.
[* icon_note] The second and third photos to the left show the digitizer cable being correctly fed through to its full length.
[* black] Carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the outer case. The first photo[https://d3nevzfk7ii3be.cloudfront.net/igi/pOnFkdECiyCBgkjU|This photo] shows the display assembly being installed '''incorrectly''', with a fold in the digitizer cable.
[* icon_note] The second and third photos to the left show the digitizer cable being correctly fed through to its full length.
[* icon_caution] If the digitizer cable has been installed incorrectly, it will not reach its socket on the logic board. '''Do not''' attempt to pull it through by force, or it will tear. Remove the display assembly, straighten the cable, and feed it through correctly.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Eliminado