Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #10

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Eliminado
Añadido
Sin cambios

Líneas de Paso

[title] Display Assembly Installation
[* icon_reminder] To successfully install a new/replacement display assembly, note the following:
[* black] Remember to [guide|7282|switch the home button|stepid=31173] from your old display to the new display (in most cases, this is not provided). The home button is thin rubber, so care must be taken not to tear it. Also, check that the mesh for the speaker hole is present in the replacement; if not, move it over from the old display.
[* black] Be sure to peel off the protective backing (usually pink or blue) from the new panel before installing it.
[* black] If your replacement display does not come with a 7 mm clear plastic ring surrounding the front-facing camera, be sure to transfer it between the old and new display.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido