Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #9

Editado por Tobias Beer

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulledcarefully pull both cables through the slot cut intoof the outer case. Otherwise,Take extra care with the digitizer cable will not reach tocable. Avoid letting it get stuck at it's lower edge which might tear its socket onbase lengthwise and render the logic boarddisplay unit dysfunctional.
[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulledcarefully pull both cables through the slot cut intoof the outer case. Otherwise,Take extra care with the digitizer cable will not reach tocable. Avoid letting it get stuck at it's lower edge which might tear its socket onbase lengthwise and render the logic boarddisplay unit dysfunctional.
[* icon_note] Remember to switch the home button from your old display to the new display (most cases this is not provided)
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].