Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #9

Editado por Brett Hartt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulled through the slot before pressing the display assemblycut into the outer case. OtherwiseOtherwise, the digitizer cable wontwill not reach to its socket on the logic board and you risk to brick the digitizer by introducing a sharp bend to the cableboard.
[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulled through the slot before pressing the display assemblycut into the outer case. OtherwiseOtherwise, the digitizer cable wontwill not reach to its socket on the logic board and you risk to brick the digitizer by introducing a sharp bend to the cableboard.
[* icon_note] Remember to switch the home button from your old display to the new display (most cases this is not provided)
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].