Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #9

Editado por Tobias Beer

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
[* icon_caution] When reinstalling the display assembly, bemake sure the digitizer and display data cablescable are completely pulled through the slot cut into the outer case before pressing the display assembly down into the outer case. Failure to do so will causeOtherwise the digitizer cable to notwont reach to its socket on the logic boardboard and you risk to brick the digitizer by introducing a sharp bend to the cable.
[* icon_caution] When reinstalling the display assembly, bemake sure the digitizer and display data cablescable are completely pulled through the slot cut into the outer case before pressing the display assembly down into the outer case. Failure to do so will causeOtherwise the digitizer cable to notwont reach to its socket on the logic boardboard and you risk to brick the digitizer by introducing a sharp bend to the cable.
[* icon_note] Remember to switch the home button from your old display to the new display (most cases this is not provided)
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].