Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #9

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the display assembly from the iPhone.
[* icon_note] Remember to [guide|7282|switch the home button|stepid=31173] from your old display to the new display (in most cases, this is not provided). The home button gasket is thin rubber, so care must be taken not to tear it, or it won't work when transferred. Also check that the mesh for the speaker hole is present in the replacement; if not, move it over from the old display.
[* black] Be sure to peel off the protective backing (usually pink or blue) from the new panel before installing it.
[* black] When reassembling, if your replacement display does not come with a 7 mm clear plastic ring surrounding the front facing camera, be sure to transfer it between the old and new display.
[* icon_reminder] After reassembly, clean the touchscreen surface with an alcohol wipe prior to turning the iPhone back on. The alcohol helps dissipate any lingering static electricity, which can cause problems with the display.
[* icon_caution] After reassembly, connect the iPhone to an AC power source before turning it on for the first time. Once the iPhone has booted up successfully, you can disconnect the AC power.
[* icon_note] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].

Imagen 2

Eliminado

Imagen 3

Eliminado