Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #7

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Loosen the three large-headed Phillips screws along the other side of the iPhone about one half turn.
[* icon_reminder] Before removing the display assembly, note the position of the cables for the digitizer and display. For reassembly, both cables must be completely pulled through the slot cut in the outer case. Otherwise, the digitizer cable will not reach to its socket on the logic board. The second photo shows the cables in the correct position.

Imagen 2

Ninguna imagen anterior

Añadido