Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #15

Editado por Mike K

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* orange] On the display assembly, apply the 6mm'''6mm x 230mm strips230mm''' strips, red side up, to the flange between the bumper and screen on the left and right sides.
[* icon_note] ''Tip: Unpeel about an inch of the white backing from the adhesive and fold the backing to the side. Apply this exposed adhesive carefully to the lower corner. Then, with the rest of the white backing on the adhesive, locate the position of the upper corner. Hold that position with one hand while peeling the backing off with the other.''
[* orange] On the display assembly, apply the 6mm'''6mm x 230mm strips230mm''' strips, red side up, to the flange between the bumper and screen on the left and right sides.
[* icon_note] ''Tip: Unpeel about an inch of the white backing from the adhesive and fold the backing to the side. Apply this exposed adhesive carefully to the lower corner. Then, with the rest of the white backing on the adhesive, locate the position of the upper corner. Hold that position with one hand while peeling the backing off with the other.''