Cambios al paso #5
Editado por Mike K —
- Antes
- Después
- Sin cambios
Líneas de Paso
[* icon_caution] Avoid placing the spudger within 20mm (3/4") of the built in camera. There is no adhesive in this location, and the spudger could damage the camera. |
[* black] Continue the technique described in the previous step to release the bezel along the top and on the left side. |
[* icon_caution] Avoid placing the spudger within 1" of the built in camera. There is no adhesive in this location, and the spudger could damage the camera. |