Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #12

Editado por Mike K

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Place a metal straight across the sheet, aligned with the two 3mm marks made in the previous step.
[* black] With the exactoX-acto knife, cut a 3 mm wide strip of adhesive. ''To
[* icon_note] ''Tip: To
avoid gumming up the adhesive, start the cut on the white overlapped backing on the top.''
[* black] With the exactoX-acto knife, cut a 3 mm wide strip of adhesive. ''To
[* icon_note] ''Tip: To
avoid gumming up the adhesive, start the cut on the white overlapped backing on the top.''