Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #4

Editado por Mike K

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] With the flat edge of the spudger under the bezel and while applying heat to the area, twist'''gently twist''' the spudger '''gently''' to release the double stick adhesive tape.
[* black] With the flat edge of the spudger under the bezel and while applying heat to the area, twist'''gently twist''' the spudger '''gently''' to release the double stick adhesive tape.
[* black] Continue working, in 1-1.5in segments, up the right size of the bezel, across the top, and down the left side. Do no work on the bottom edge yet.
[* icon_caution] Only insert the spudger from the outer edge of the display assembly, and do not push it more than 6mm (1/4in) towards the inner edge of the bezel - otherwise you risk damaging a gasket between the inner edge of the bezel and the screen.