Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #3

Editado por Mike K

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] While applyapplying heat with a heat gun:
[* red] Place the flat edge of the spuderspudger under the bottom lip of the bezel on the lower right portion of the display assembly.
[* black] While applyapplying heat with a heat gun:
[* red] Place the flat edge of the spuderspudger under the bottom lip of the bezel on the lower right portion of the display assembly.
[* red] Gently pry the corner of the bezel upward, creating enough space to insert the flat edge of the spudger between the bezel and display assembly.
[* orange] With the flat edge of the spudger under the bezel, '''gently twist''' the spudger to release the double stick adhesive tape.