Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #3

Editado por Mike K

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] On the right corner,While apply heat with thea heat gun for 5-10 seconds,
[*
gun:
[*
red] While continuing to apply heat, placePlace the flat edge of the spuder under the bottom lip of the bezel on the lower right portion of the display assembly.
[*

[*
red] PryGently pry the corner of the bezel upward, creating enough space to insert the flat edge of the spudger between the bezel and display assembly.
[* orange] With the flat edge of the spudger under the bezel, '''gently twist''' the spudger to release the double stick adhesive tape.
[* black] On the right corner,While apply heat with thea heat gun for 5-10 seconds,
[*
gun:
[*
red] While continuing to apply heat, placePlace the flat edge of the spuder under the bottom lip of the bezel on the lower right portion of the display assembly.
[*

[*
red] PryGently pry the corner of the bezel upward, creating enough space to insert the flat edge of the spudger between the bezel and display assembly.
[* orange] With the flat edge of the spudger under the bezel, '''gently twist''' the spudger to release the double stick adhesive tape.

Imagen 2

Ninguna imagen anterior

Añadido