Saltar al contenido principal

Cambios al paso #2

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case.
-[* black] Lay the LCD on the front panel as seen in the second picture.
+[* black] The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.
+ [* icon_caution] Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.
+[* black] Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.
+[* black] Set the LCD face down on the front panel.