Saltar al contenido principal

Cambios al paso #11

Editado por Kelsea Weber

Edicion aprobada por Kelsea Weber

Antes
Después
Sin cambios

Líneas de Paso

[* black] Orient the Furby face down, with the base facing away from you.
[* green] Locate the clips below the ears.
-[* black] Repeat the technique used in Step 6. Create leverage using the 1.0 mm Flathead Screwdriver to press upward into the clip, while also pulling back on the clip itself.
+[* black] Repeat the technique used in Step 6. Create leverage using a metal prying tool to press upward into the clip, while also pulling back on the clip itself.