Saltar al contenido principal

Cambios al paso #11

Editado por Eduardo

Edicion aprobada por Eduardo

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Orient the Furby face down, with the base facing away.
+[* black] Orient the Furby face down, with the base facing away from you.
[* orange] Locate the clips below the ears.
-[* icon_note] Repeat the technique used in Step 6.
-[* icon_reminder] Create leverage using the 1.0 mm Flathead Screwdriver to press upward into the clip, while also pulling back on the clip itself.
+[* black] Repeat the technique used in Step 6. Create leverage using the 1.0 mm Flathead Screwdriver to press upward into the clip, while also pulling back on the clip itself.