Saltar al contenido principal

Cambios al paso #11

Editado por Jordan Castillo

Edicion aprobada por Jordan Castillo

Antes
Después
Sin cambios

Líneas de Paso

[* black] Orient the Furby face down, with the base facing away.
-[* black] Locate the tabs around the ears.
-[* orange] Use the same technique used in Step 6. Create leverage with the screwdriver to press upward into the tab, while also pulling back on the tab itself.
+[* black] Locate the clips around the ears.
+[* orange] Use the same technique used in Step 6. Create leverage with the 1.0 mm Flathead Screwdriver to press upward into the clip, while also pulling back on the clip itself.