Saltar al contenido principal

Cambios al paso #3

Editado por Kyle Trambley

Edicion aprobada por Kyle Trambley

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the rectangular black adhesive foam on top of the battery by peeling it away from the battery.
+[* red] Remove the rectangular black adhesive foam on top of the battery by peeling it away from the battery.
[* black] Desolder the battery connections from the circuit board.
[* black] Replace the dead battery with a new 3.7 volt lithium polymer battery.
[* icon_note] Refer [guide|750|here] for more information how to desolder the battery.

Imagen 1

Versión Antigua

Nueva Versión