Saltar al contenido principal

Cambios al paso #3

Editado por Kelsea Weber

Edicion aprobada por Kelsea Weber

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the folded ribbon cable by pulling it straight out of the connector on the motherboard.
-[* icon_note] This ribbon cable must be removed before removing the battery because it is attached to the battery with adhesive.
+[* black] Use a spudger to flip up the black retaining flap on the ZIF connector.
+[* black] Pull the folded ribbon cable straight out of the connector.
+[* icon_note] This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.