Saltar al contenido principal

Cambios al paso #2

Editado por PikaShu

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the following four screws securing the cable cover to the logic board:
[* red] One 2.7 mm Phillips screw
[* orange] One 2.6 mm Phillips screw
[* yellow] One 1.3 mm Phillips screw
- [* green] One 1.2 mm Phillips screw
+ [* green] One 1.2 mm (small head) Phillips screw