Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #3

Editado por Adam O'Camb

Edicion aprobada por Adam O'Camb

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use a plastic opening tool to gently detach the battery connector from the socket on the devicelogic board. Start lifting off the connector from the bottom side, by placing the tip of the tool between the loudspeaker enclosure and the metal cover of the connector.
[* black] Use a plastic opening tool to gently detach the battery connector from the socket on the devicelogic board. Start lifting off the connector from the bottom side, by placing the tip of the tool between the loudspeaker enclosure and the metal cover of the connector.
[* icon_note] The battery connector comes off vertically from the logic board. Do not apply force sideways.
[* icon_caution] Be careful not to rip off the battery connector socket soldered on the logic board. There are 4 very small soldering points awaiting this mistake!