Saltar al contenido principal

Cambios a Paso #1

Editado por John Toncich III

Edicion rechazada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screwscrew. using the J000 bit
[* orange] One 1.5 mm Phillips screwscrew. using the J000 bit
[* red] One 1.7 mm Phillips screwscrew. using the J000 bit
[* orange] One 1.5 mm Phillips screwscrew. using the J000 bit