Cambios al paso #1
Editado por jg44070 —
Edicion rechazada por Jake Devincenzi
- Antes
- Después
- Sin cambios
Líneas de Paso
[* black] Remove the following screws securing the battery connector to the logic board: |
[* red] One 1.7 mm Phillips screw |
[* orange] One 1.5 mm Phillips screw. |
[* black] Use a plastic opening tool to gently detach the battery connector from the device. |
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This |
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This |