Saltar al contenido principal

Cambios a Paso #1

Editado por Eric H

Edicion rechazada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screw.
[* black] Use a plastic opening tool to gently detach the battery connector from the device.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This may come loose while prying the battery connector from its socket.

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Eliminado