Saltar al contenido principal

Cambios a Paso #20

Editado por Phillip Takahashi

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert the leads of the power supply through the holes indicated in step 10. Insert the wires until at the wire sheath is against the PCB.
[* black] Insert the leads of the power supply through the holes indicated in step 10. Insert the wires until at the wire sheath is against the PCB.
[* black] Solder the wires to the PCB and clip off the excess wire.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Eliminado