Saltar al contenido principal

Cambios a Paso #19

Editado por Phillip Takahashi

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Pre-tin the exposed wires to add rigidity to them and keep them from fraying when pushing through the PCB through-holes.
[* icon_note] Pre-tinning is when you cover or fill wires with solder to improve a solder connection. Be sure that your pre-tin does not have any globs on it, or it will not fit through the PCB through-holes. If necessary, trim the wire so that it will fit through the holes.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido