Saltar al contenido principal

Cambios al paso #3

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use the transparent orange loop to disconnect the large orange ribbon cable from the hard drive.
-[* icon_note] This is a bit tricky. Try rocking the cable gently from side to side while applying even pressure. If you bend the pins, do your best to straighten them, using the hard drive cable as a guide.
+[* black] Pull the plastic hard drive connector straight away from the hard drive.
+[* icon_note] This is a bit tricky. Try rocking the connector gently while pulling with even pressure. If you bend the pins, do your best to straighten them, using the hard drive connector as a guide.
+[* black] Hard drive remains.

Imagen 1

Ninguna imagen anterior

Añadido